Automatic Smart Bottle Filling Machine Liquid haute qualité Filler Conveyor Belt 110v Or 220v

Through early customer feedback, now an upgraded version is launched The new model has the following upgrades:
1. Change the belt to waterproof
2. The motor is waterproofed 3
. The moving speed of the conveyor belt is increased to 10cm per second (the old version is 2cm per second)
4. The mounting bracket with holes on the side of the conveyor belt is more stable
5. Uniformly equipped with optical fiber sensor to improve the accuracy of induction positioning (the old version uses infrared induction)
6. The speed control knob is installed on the conveyor belt for easy operation
7. The height of the bracket is increased to 400mm, and the effective height is adjustable from 0-300mm (previously equipped with four 200mm steel pipes, now it uses one 400mm, one 200mm, and two 100mm)
8. Lengthen the receiving tray to 200mm (old model 150mm)

Prammers for products
Voltage: 110V-220V
Input voltage:100V-240V
power supply device Machine input voltage: 12V 5A DC
power supply Filling time: 0.1s-999 min
Maximum flow rate: 1.5 /3L
liters per minute Filling range volume: 2ml-3000ml / 1ml-1500ml
Filling error: +/- 1%
Anti-drip function Control manual, automatic, intelligent sensing Intelligent touch distance0-5mm Adjustable stand up to 255 mm Work mode

1. When the red light is on, it means the smart sensor function function are available. You can connect smart sensor switch line to the control port.
2. When the green light is on, it means the pump is working, and the green light is off, it means the pump has stopped working. It is also a jog function button. Click once to fill
3. Yellow light: It is a manual switch that can set the fill time and volume, and then press the yellow button to fill continuously

Product Features:

1. Suitable for drinks, liquor, soy sauce, juice, milk, lotion, etc.
2. Automatic electric induction of the eyes, intelligent filling is more efficient
3. Microcomputer control system, high timing precision reaches 0.1 seconds
4. Convenient design, removable water pipes, front and rear brackets can be installed
5. Entrance and exit can be removed and replaced
6. The double-headed heat-resistant model has two built-in heat-resistant pumps, which can discharge water or close one of them at the same time.

Packaging:
1 * Multifunctional liquid filling machine